roll-roofing-material

Proper installation of rolled roofing is essential. Otherwise, the roof will present you with a never-ending list of problems that cost a lot of money and time to fix. Rolled roofing is one of the best tools for changing your home’s appearance – but only if done right. A paint job is not the only way of remodeling or enhancing the home’s aesthetic appeal. Learning how to install the roofing well is mandatory if you want to do this project on your own. This type of roofing is great for homes with flat roofs rather than inclines or dormers.

So, the following is the guideline to follow when you want to install rolled roofing properly.

Work under Right Temperatures

First, you should undertake this project on days when the temperature is just right. Rolled roofing installs well when the weather is warm. This is because it is fragile, thus capable of breaking easily on exposure to cold temperatures. The temperature outside should be around 45 degrees Fahrenheit. However, if you must install the roofing when temperatures have dropped considerably and the cold season is here, you first ought to warm the metal. Installing an underlayment is highly recommended, but not mandatory, before placing the roofing.

Install Starter Strip

Next, install a starter strip. Properly installed starter strip gets rid of bumps and curves when you finish your project. Use roofing cement to secure a 17-inch strip to the roof’s eaves. While at it, get a good roof roller and use it in flattening the strip. On top of this, it is highly advisable to chop in some nails while maintaining a distance of 12 inches between each one. This would work well if you began the entire process by laying the first course of the rolled roofing. Start from one edge before making your way to the next.

 

Press the Edges Well

The job might need a bit of redoing if you fail to press the edges of your newly installed roof firmly. Pressing the edges down protects the roof from collapse or lifting off when strong winds hit the area. Do not forget that roll roofing is specialty roofing. Therefore, it needs the right set of skills and attention to detail to do properly. Installing it on your own has various advantages. It saves you money, which would have gone into paying a costly roofing contractor. This roofing has more advantages as you will learn below.

Advantages of Rolled Roofing

The roof only needs one layer. With other roofs, you have to install 2-3 layers, which take a toll on your finances. The fact that the rolled roofing is not only cheap, but also lasts between 6 and 12 years is great news if you do not plan to install new roofing in a year or two. The same materials used in making asphalt shingles are in roll roofing too. Furthermore, you need minimal effort to install this roof. It is possible for you – despite the lack of experience – to install this roofing solution expediently.

There is no need for investing in tools such as large saws and nail guns when installing rolled roofing. This, once again, cuts down on costs, thus enabling you to save some money. What is more, the installation process is not replete with falls and injuries, which are common occurrences when installing other roofing types. With this roof type in place, you will never have to worry about the impact that rainwater, gusty winds, snow and hail will have on your roof. This is because it is well equipped to provide adequate protection for the next 6-12 years.

For help, especially when you get stuck, do not hesitate to contact your local roofing experts.

No Comments

Be the first to start a conversation

Leave a Reply

  • (will not be published)